To remove a bad piece of siding, you have to pull out two rows of nails: the ones in the bad board itself, and those in the board directly above. Siding is thin and splits easily, so the tricky part of this job is pulling nails without damaging surrounding boards. A cat’s paw is the best tool for digging out nails if damage to the surrounding wood doesn’t matter (Photo 1).
Tom (the owner) responded quickly with an estimate and was able to add additional painting that we requested (e.g., paint window trim). He was also able to provide an accurate timeframe regarding when the work would be completed. Schell met with us to help pick out our paint choices. She provide wonderful insight into the colors that might work. She didn't try to overly influence our choices but provided options and gave us her expert opinion when we asked. She also took into account our needs when scheduling the work. We needed to have repair work done on rotting wood on the window sills on our porch and a border removed from a bedroom. Jeff and Tracey provided expert carpentry work to fix things prior to painting. They were friendly and came to the job prepared with the tools and wood they needed. They got right to work and finished the job quicker than I would have expected. This isn't their first rodeo, as the saying goes. The painters (Shawn and company) came prepared for our job, worked hard, and explained any difficulties and suggested fixes (another coat of paint) encountered in our job. Shawn and his painters didn't waste any time not working - they each had their roles and attacked the job with energy. Shawn and crew were friendly and made sure they kept in touch with us daily to let us know when they planned to arrive and leave our job, accommodate our schedule, and let us know about the progress they were making. There was not a lot of standing around but much hard work, even in ninety plus degree weather. They also made sure that our three house cats didn't escape:) .
Here is where this affects you as a consumer. You select a painter with a contract that says 2 coats, $500 down. You give the company the deposit and pick your colors a couple of days before the project starts. The painter goes to the store with your colors and figures out they are deep base. He (or she) not only needs to charge you more for the paint, but he also needs to charge you for a dark gray primer coat. Ninety nine percent of the time that primer coat is going to be really, really expensive since you already gave a deposit.
Third: The contractor buys the materials. We get them at a better rate and customers really don't know what they are getting into by being a material racer. Once again, I'm not referring to the guys that paint a bedroom or 2 a week. Tell the homeowner to go grab 50 gallons of paint, $300.00 worth of sundries and related job cost items and I'd be interested to see how it works for them....IT WILL NOT. And if were talking about people getting taken advantage of here, the paint suppliers with no relationship to a homeowner will 100% GOUGE the customer and completely take advantage of them with pricing. Contractors will pay nearly half the price and will still save the customers money marking up paint 10-15%.
"Jose was amazing! I had asked for just a quote on a texturing job, and he was over within the hour. Not only did he give me a great quote, but he was able to fit the work in for me that day. He did such a great job mudding and texturing (and really fast for how perfect it came out), that I asked if he could paint the same room and the exterior of my garage as well. He happily agreed and finished all of this in one afternoon! All of my neighbors were impressed. He even went to work on another job while the texture was drying to maximize time. Such a hard worker. He is the man. I definitely kept his number handy for my next project & won't hesitate to call him again. I'd recommend him to anyone."

Oh, where to begin? Let me start with 'watered down paint'. 25-50% before the material gets to the site? Impossible. You would basically be painting with water at that point. It would be less of a hassle, and cost, to simply use proper material. You would be forced to apply three coats instead of two, as the coverage would be horrible. Whatever cost you think might be saved in materials would be lost in labor.
You are right on with this - why do people leave switch plates on when it's just so easy to take them off? Another thing that happened to us - we had the popcorn ceiling taken off and the ceiling painted white. When the job was done and I later went to change out all the fixtures/fans, they had left every fixture in place, so there was a large patch of popcorn and unpainted ceiling left behind - it just didn't dawn on me to specify that they take those down before scraping and painting. It was kind of a mess.
Painting Cost Estimator is a job tool formulated to help the residential contractor provide an accurate quote based on actual costs and desired profit. It is important to factor in your actual fixed and variable costs such as overhead, labor, equipment, and supplies. The Job Cost Estimator calculates an accurate figure with which to present to your client on a customized quote letter. Benjamin Moore & Co., created the Job Cost Estimator in order to assist you in optimizing your business’s profitability. House Painting Home Painters Highlands Ranch Colorado Click Here
×